Tuesday, June 26, 2012

Urban Unangax^ Culture Camp

Culture Camp
Day 3, Sunday
Sunday we get half the day off. Camp doesn't start till one.  We try to sleep in.  Sleep cycle is off what with sun not going down till about midnight.  Each day more bleary eyed and punch drunk.  The predicted rain has started.  Pictures to follow, not necessarily in a good narrative sequence but strictly in the order they happened.
 Heading out, the golden lion after which the motel is named.  Bizarre.  The big game ethos.  Same thing out at the airport, stuffed animals in glass cases.
 John in the lobby posing with the stuffed heads.
 Breakfast at Gwennies another one of those places with stuffed heads. Corned beef hash, eggs, muffins.
 Musc ox on the wall.  The people on the ground are not stuffed.  Not sure about the guy with the sun glasses on the back of his head.
Stuffed bear near the entrance. 
Wooden Indian on the right, John on the left.
Myself in front of the place.
Gennie's outside wall.
Meanwhile, back at the APIA, kayaks we built the last two years.
Our pile of kayak model wood in the hallway.
The kids ripping lumber for kayak hull stringers.
John's Unangax^ hat.
And desert.  The item on the right is a peanut butter and chocolate bumble bee.  Wings of almond slivers. The bumble bee is an icon of Aleut culture.

Monday, June 25, 2012

Urban Unangax^ Culture Camp

Day 2
Saturday
Today we buy materials and any missing tools we will need to build half scale baidarka models.
 The day starts at the Golden Lion Best Western.
 The owner is apparently a big game hunter.  His trophies adorn the stairwell.
 Mike Livingston drives us around to buy out materials.  But first we have to move some stuff into the trunk of his car before we have a place to sit.
 We stop off at the APIA building to inventory what we already have so we know what we still need to buy.  I ask John to hold up the stomach from the seal that we had at the previous year's culture camp.
 After shopping we stop off at title wave books to see if there are any new Arctic books to buy.  Like we need any more of those.
 I have also stocked up on beverages.
 Seven pm.  Time to call home and check in with the family.
On the way back to the motel we stop of at Lake Hood which has Americas largest collection of bush and sea planes.  Then more weird sleep with the midnight sun streaming in the windows.

Urban Unangax^ Culture Camp

Day 1
Flying to Anchorage from Oakland. Much time at airports. I get window seats on the planes and have bought three crime novels to pass the time.
Six hour layover in Seattle.  Even though I brought my own food I grow tired of it at some point and order vegetable-chicken Gyoza and a beer.  Afterward, my mood lightens.  Then onward to Anchorage. I give up my window seat so a family can sit together.  I doze on and off and time passes quickly. Land at 11:30. Still light out.

Saturday, June 23, 2012

Danes Build Baidarkas

Danish kayak builder and teacher Svend Ulstrup,  sent me some photos of the work he is doing in Denmark. Apparently, his students just finished building 48 baidarkas or iqyan.
One of Svend's innovations is to put hatches like miniature cockpit coamings on his boats.  He also has his students add sea socks which keep sand out of the boats and can double as backpacks.
Unlike most builders in the US, Svend uses all plant derived products products for building his kayaks, lashings are hemp or jute, sewing twine is cotton, boat skins are linen and sealant is linseed oil.  Although he seems to be adding some synthetic colorings these days.
For more info on Svend, see his website

Tuesday, June 19, 2012

Plywood, the other boat skin

One of my ongoing research areas is what to cover a skin on frame boat with other than industrial fabrics sealed with modern sealants.  Yes, there are animal skins, and I know that people have covered their boats with cow hides, but you see, we live in an industrial society and the imaginary scenario I am creating for myself is that the factories have shut down and one has to operate as boat builders of old did, that is, to find boat building materials in their immediate surroundings.
Perhaps we have to broaden our definition of skin on frame a bit and allow a boat where the skin is the main structural material and the frame is of secondary importance.  Enter the plywood boat.
In my case, not a boat exactly but a plywood pool punt.  The main idea was to not spend a lot of money.  The secondary idea was to provide a stable lounging platform for a pool in an environment that is too cold for swimming for most of the year.
Here is the punt under construction.  One sheet of plywood formed the bottom, another formed the sides.  Height of the sides was just a bit under 16 inches.  Early trials established that 16 inch sides were too high so I trimmed them down to 13. Perfect. The sheets of plywood are screwed to battens inside the punt for additional support.  Water proofing of the screw holes courtesy of 3M 5200. Water proofing of the seams was done with a layer of glass adhered by epoxy. 
Initial trials also established that the sides of the pool abraded the fiberglass that I sealed the seams with so I added some wooden bumpers at the corners and some skid rails at the bottom for dragging the punt in and out of the pool. Then a few coats of gray paint from a five gallon bucket that a friend was tossing away, or rather, giving away. And oh yes, we realize that the pool is greener than it should be. 

The same day we launched the new improved punt we also ran into a small futon and some quilts that a neighbor was discarding.  These are now lining the bottom of the punt.  Very comfortable and stable to boot for someone used to sitting in narrow kayaks.  Sometimes it is OK to trade speed for comfort.

Saturday, June 2, 2012

Fire as an Alternative to TV


I don't want to make too much of the making of and sitting by campfires mainly because it is something that most people who go camping have probably experienced for themselves,and that sitting by a good camp fire is vastly superior to watching TV.  Still, it is something that needs to be said. And I have some theories about why a campfire is better than TV and I will share them with you.  Feel free to disagree.
First of all, the obvious - fire is entertaining in and of itself.  There is drama in a fire.  One knows the plot well enough but never the details.  Wood, at first reluctant to burn for a variety of reasons like wind, lack of kindling, moisture, etc. eventually is made to burn.  Then the fire burns, produces coals and maintenance of the fire becomes easy, one simply throws more wood on the fire and at some point becomes tired of the process and lets the fire die for lack of fuel or actively snuffs it out.  This is the plot of the entertainment known as fire. And there are many variations on it.
The primary reason I prefer fire over TV is that fire has no political or social agenda.  It does what it does. It burns according to various basic rules and thus is educational about the laws of thermodynamics.  Not that looking at fires is what inspired thermodynamicists to come up with their theories, but looking at fires does give one a sense of how fire works and that in itself may give rise to many useful metaphors.  TV on the other hand is almost entirely agenda driven.  Someone is selling you something constantly, obviously through commercials but also in the content that the commercials enable.  Implicit in all story telling is a viewpoint, a lesson, a moral.  Even if nothing obviously new is being communicated, the very fact that the TV portrays some activity is some kind of endorsement for it or a polemic against it.  If you don't agree with the lifestyle choices of the people portrayed on TV then TV watching is a chore.  So fire, much better.
Finally, sitting by a fire with other people is a social affair and as such, becomes a lab experiment in social dynamics.  For one thing, the progress of the fire needs to be managed and as someone once famously said, no two people can ever agree on the right way to poke a fire.  If more than one person wants to manage the fire, a struggle invariably ensues, covertly or overtly.  Words will be said about the management of the fire and a winner in the struggle will emerge.
Enough for now, I have found that the internet has lots of campfire pictures.  I will comment on some of them in future posts since the pictures raise specific points such as preferred ways to arrange the logs, what to wear to a campfire, safety issues around the campfire, what to talk about at a campfire, how to cook on a campfire and more.

Monday, May 14, 2012

Chagudax^

It used to be that the only way to get your memoir published was to be a famous person or an interesting writer or to have such an interesting life that someone else wanted to write your memoir for you, as told to style. The truth is that a lot of people have had interesting lives and it is too bad that more of them don't write memoirs, but then, what would we do with billions of memoirs.  Where would we store them all?  And if you think about it, a lot of the memoirs would be more or less similar or at least that is what people think.  And so, hardly anyone writes memoirs at least in statistically significant numbers and instead of there being a vast and repetitive glut of memoirs, there's a vast array of lives that have never been documented in print.
So it seems that Andrew Gronholdt had the sense that his life lived mostly in the Aleutians during a time when traditional Aleut culture was rapidly being overcome by the mainstream American culture might be worth putting down in writing.  Apparently, Gronholdt worked at his memoirs but but died without getting them published.  According to the book, Gronholdt's daugher, Sharon Gronholdt and her friend, Mike Livingston decided to edit Andrew's writings, lay out the book, add photos, many of them taken by Andrew and publish the book themselves though Blurb, a print on demand publisher.
So there it is.  Mike Livingston sent me a copy.  I have leafed through it, looked at the pictures and started reading it.
The title and the cover picture both made me think that the book was primarily about bent wood hat making.  But it isn't.  It's about Andrew Gronholdt's life just off the Alaska Peninsula in the north Pacific in the Shumagin Islands, the place where Vitus Bering discovered Alaska and sea otters and set off the chain reaction that led to the colonization of Alaska by the Russians.
The Russians sold Alaska to the Americans who then began to work on Americanizing the native population.  By the time that Andrew Gronholdt was born, the Americanization was just about complete and much or even most of the Aleut culture was disappearing.  Andrew Gronholdt, however, must have had a sense that the culture needed preserving or in the case of wooden hat making, reviving from the death it had suffered a few decades earlier.
The book is lavishly illustrated with photos as well as some of Andrew Gronholdt's sketches and working designs for various Aleut inventions, not only the hats but also bailing pumps, fox traps and other things that Andrew was interested in.
The book at a price of $109 a copy is probably not within everyone's budget, but if you are interested in Aleut or Alaskan history at the beginning of the twentieth century, you may want to talk your library into getting a copy. Or if you do have the $109 you can get a copy at Blurb.
By the way if you think your own life or the life of someone you know is worth documenting, co-editor Mike Livingston encourages readers to just do it and put together a book and publish it through Blurb or one of the other self-publishing houses.  We probably don't need everyone to write a memoir but a few more might give the humans of the future a bigger window into the past.

Why Are Sea Otters so Cute?

The sea otter post on my blog is the all-time most popular. No other post even comes close. I guess there are a lot of people out there who want to look at pictures of sea otters. Sea otters are probably the cutest animals there are, cuter than pandas even. 
What makes them so cute? I think that the key to sea otter cuteness is the fact that they look like cuddly baby animals even as full grown adults.  I think it's all that fur that makes them look so cuddly.  And they lay on their back and they stick their furry paws up in the air and the fur makes their eyes look like little buttons and that black furry nose, so cute.  Makes you want to just pick them up and squeeze them.

Thursday, May 10, 2012

Whatever Happend to Do It Yourself?


Boat plans from Popular Mechanics Magazine
Whenever I am giving a kayak building demonstration somewhere in a public space, some guy in his sixties or seventies will come up and say, "Yeah, I remember building one of these in the Boy Scouts."  The point worth mentioning here is that it is never a forty or thirty year old or even a fifty year old that comes up and says, "Yeah, I remember building one of these in the Boy Scouts."  My statistical sample isn't very large, but it seems to me that sometime in the post-WWII era, people built stuff and then they stopped.

So what happened? 
I have some theories. 
One of the factors that encouraged the do it yourself movement was prosperity and the high cost of wages.  Since most things consumed in the US were made in the US rather than imported, manufactured goods were relatively expensive because of the cost of labor.  So if you made something yourself, you could save on the cost of labor. Also, since manufacturing was still a big part of the US economy, the skills to make things were still valued and encouraged.  Schools were still expected to turn out graduates that could enter a job market where manual skills were valued. 
Folding kayak built from Popular Mechanics plans
And there were magazines like Popular Mechanics and Mechanix Illustrated to cater to do-it-yourselfers with plans and instructions. It seems like the golden age of  home made projects.
The other factor working against home made boats is the invention of roto-molded boats. This process eliminates most of the human labor from the making of a boat.  Kayaks and canoes can be made in a mold.  A little clean-up and some trim is all that needs to be added to make a finished boat.  The cost of these boats is so low compared to making your own that the effort hardly seems justified from a cost perspective.
Still, various plywood boat kit manufacturers seem to be making a living turning out kits for home builders. But a kit is not the same thing as making something off a set of plans out of a magazine.  I suspect that kits are popular because the general level of confidence to make something by hand has declined considerably since the middle of the twentieth century. 

Friday, May 4, 2012

On the Evolution of Kayaks

There is a notion drifting around the skin on frame kayak world that skin on frame kayaks benefit from 4000 years or so of evolution.  The implication is that skin on frame kayaks were about as well adapted to their environment as could be.  Well, maybe.  But I want to express some contrary opinions on the topic. 
First of all, kayaks were designed and not evolved.  Evolution is imagined to proceed by random changes to a design which is then approved or rejected by the environment.  Kayaks are built by humans who by virtue of experience and ability to communicate with other kayak builders have some knowledge of what makes them work.  As a consequence, changes to kayak design are not random but rather, directed. So human designs can change rapidly and become optimized in a much shorter time than evolved designs. 
Secondly, evolution as imagined, only benefits current conditions.  That is, evolutionary fitness is potentially lost if conditions change.  If there was a major change in conditions, say 500 years ago, then both the 4000 year old and 1000 year old design would have to adapt, one design having to throw 3500 years of evolution on the junk pile and the other only 500 years of evolution. 
Actually, this is what happened.  All kayak designs were thrown on the junk pile when modern petroleum powered boats were developed.  Kayaks as a species went extinct in the arctic but mutated into recreational craft and migrated into industrial cultures to the south.


In addition, little is known about kayaks older than 400 years.  So whether they evolved in the sense of "improved" in the last 4000 years is strictly speculation.  I would imagine that kayaks of 3000 years ago were probably as good as kayaks 1000 years ago. I would think that one hundred to two hundred years would be sufficient to refine a design about as much as was possible.  After that, improvements would be minimal.
What did probably happen in the Arctic was that conditions changed periodically.  Since the kayak was a hunting craft its success had to be judged by its ability to bring its builder within range of prey.  If prey changed or hunting conditions changed old adaptations might have to be discarded and replaced by new designs. 
And the last big change to kayak designs happened roughly 400 years ago when European whalers showed up in the arctic, bringing with them steel tools and later, milled lumber.  Steel tools allowed a range of joinery in kayak frames that was previously inaccessible.

Thursday, May 3, 2012

Iqyax^ (Baidarka) Flexibility Revisited

One more time now. Back to the topic of what makes baidarkas flexible and why one would make a baidarka flexible. This I hope to be a definitive treatment of the topic, by me anyway. 
I touched on this in a previous post prompted by a visit to the Phoebe Hearst Museum of Anthropology at the University of California in Berkeley. What I discovered on that visit were a bunch of modification to the Atkan Iqyax^ in the museum collection, apparently made to reduce the flexibility of its frame.
There are some accounts on the topic of flexibility that indicate that the Unangan builders tuned the flexibility of their iqyan to suit conditions.  High flex iqyan were built for rough water conditions and low flex iqyan were built for smooth water conditions.  The flex of any given iqyax^ couldn't be modified on the fly but as the frame in the Hearst museum indicates, flex of a flexible iqyax^ could be reduced by modifications to the frame when the skin was off.
On a related note, Father Veniaminov commissioned the building of an iqyax^ with bone shims in Unalaska roughly 200 years ago when there were still people who knew how to build such boats.  His informants told him that the shims increased the speed of the boats. When he tested the iqyax^ with the shims, he found that it was no faster than an iqyax^ lacking the shims. But even though the test was inconclusive, it may be that he tested the boat only in smooth water conditions where the shims would offer no advantage.  In addition, we do not know if his builders tuned the flex of the commissioned iqyax^ to take advantage of the shims.
So without further ado, on to the details of how to tune the flex of an iqyax. Let us start with a picture.
The picture shows two aspects of the iqyax^ frame.  The top frame is shown in roughly neutral position such as the iqyax^ would assume on flat water.  The bottom frame is shown in flexed position with the ends pushed up such as it might look at the bottom of a wave trough.  Not shown is the frame with the ends flexed down, a configuration the frame would assume when going over the crest of a wave.
The important thing to note is that the keelson is slightly curved in the relaxed position. Flexing the keelson more as in the bottom picture would move the tail fin and bow assembly closer together, closing their respective gaps between them and the deck end cross blocks. Likewise, if the ends of the frame flexed down, the keelson would straighten out and the tail fin and bow assembly would move away from the deck, increasing the size of the gaps.
The question for the builder is how to tune the flex.  Should the kayak in the neutral, unstressed position have gaps at the tail fin and bow assembly or should they be tight up against the deck cross blocks?  My guess is that for optimum flex, there should be about a half inch gap both at the tail fin and bow assembly in the neutral position.  This allows flexing of the keelson upward and downward.
If there is no gap in the neutral position and the ends of the keelson flex upward, the keelson would exert pressure on the ribs and flatten them, thus distorting the hull.  If the gap is there, the keelson ends can flex up and close the gaps without distorting the ribs. 
The parts of the frame are joined in such a fashion that the keelson, the bow assembly and the tail fin are all lashed or pegged together tightly so that they act as a single unit. That is, the parts of this assembly do not move with respect to one another.  The keelson is lashed to the ribs, however, the ribs are loosely set into their mortises so they can pivot forward or backward as the keelson flexes.  Also, the tail fin is slotted into the back of the rear cross block but is free to move forward or backward.  Likewise, the rear deck stringer is not lashed to the tail fin to allow it freedom to move forward and backward.
At the bow, the bow assembly joins the deck.  The deck plate joins up with the ends of the gunwales but like the tail fin, can move forward or backward, opening up a gap in the process.
 
The picture shows the gap between the end of the deck on the left and the bow plate on the right.  The deck stringer has been lashed to the bow assembly, a modification to limit the motion of the bow assembly away from the end of the deck.
The notch in the tail fin mates up with the tail cross block.  The lashings between the tail fin and the cross block are an add-on and limit the ability of the tail fin to move forward and backward.
 
This picture shows one of the two lashings that join the tail fin to the keelson.  This joint is quite rigid so that the tail fin would move with the keelson rather than sliding back and forth on the keelson.
So to recap, to build a flexible iqyax^ the key is to allow the tail fin and the bow assembly to move closer to or away from the ends of the deck as the keelson shortens as it is flexed or lengthens as it is straightened.
To allow internal movement of the frame also requires the cooperation of the skin.  If the ends of the kayak are to move in and out, the skin must have enough stretch to allow this motion.
Modern synthetic skins may or may not have enough stretch to allow motion of the frame.  Also painting the synthetic skin with a sealer that penetrates the skin tends to glue the skin to the frame, essentially preventing internal motion of the frame and cancelling any structural allowances for frame motion.

Thursday, April 26, 2012

How Many Kayaks Are There?

I lifted this photo off facebook.  It shows a bunch of kayaks and canoes all rafted up together to set a Guiness Book world record.  The photo came with the following info:
"The largest raft of canoes and kayaks consisted of 1,902 boats and was achieved at the event "One Square Mile of Hope". The event was sponsored by the Central Adirondack Paddlers Society, and took place on Fourth Lake in Inlet, New York, USA!"
The photo got me to thinking, how many kayaks are there in the world right now?  Probably lots and lots, maybe even millions, thanks to the miracle of injecting plastic into a mold.  This is not intended to be a slam on plastic kayaks by the way.  Even home built skin on frame kayaks in the world right now must come close to the number of skin kayaks that existed at the peak of population in the Arctic. 
Aleut population at its maximum was estimated to be about 20,000.  Perhaps a third of that population was adult males each of whom supposedly had a kayak. So at its peak, there were perhaps 7000 kayaks in the Aleutians. 

Thursday, April 12, 2012

What's Popular - More Stats

In a previous post I was musing on what makes certain posts more popular than others.  I looked at the stats that google provides to the blogger in more detail and found that my initial suspicion was correct.
The reason that the Iqyax^ and the Sea Otter post is popular is that it has pictures of cute sea otters.  "sea otter" is the search term that brings the most visitors to my blog. It beats the next nearest search term "frilled lizard" by about a factor of 20.  "Aleut paddle" as a search term in various combinations is about as popular as the frilled lizard.
Another interesting statistic is that traffic was down over the Easter weekend but picked right up again on Monday.  I'm not sure of this, but I suspect that a lot of people do their internet time wasting at work, that is, people who sit at a computer monitor at work. If you're working a cash register, stocking merchandise, driving a car or truck, busing tables or mowing a lawn or shoveling snow or pounding nails or pouring cement, then you probably don't visit my blog when you're at work.

Monday, April 2, 2012

Post Apocalyptic Boat Skin

I periodically visit my friend and neighbor Tim Anderson at the Control Tower of the former Alameda Naval Air Station where he both lives and works.  Most recently, I delivered some sawdust to him for use in his composting toilet and as is usually the case, Tim offers me something in return, in this case, a vinyl banner.  I am not exactly sure where these large sheets of plastic are used, but they have the look of something that hangs up in an exhibition hall at a trade show.  Once the trade show is over, the banners get tossed or at least recycled and that is how Tim got them.  And then I got one.  
So far, this is all very boring, but wait, the plot thickens. 
One of the challenges of skin boat building is to use opportunistically gotten materials to build them.  Old wood or even new wood that does not come from a lumber yard is fairly easy to come by.  So is string.  The only thing I typically have to buy and can't easily get in a pre-used form is the skin.  So enter Tim Anderson with the vinyl banners.  I haven't tried them yet as a skin boat cover but imagine that they will work, even if the are a little heavy. 
So this is the tie in with the post apocalyptic theme.  In a world where industrial manufacturing has collapsed
where does one get materials from?  If the manufacturing system has just collapsed, the most obvious way to get materials is to scavenge.  All the stuff that was manufactured will still be available, only not necessarily in stores.  One may have to re-purpose goods made for other applications.
And if you haven't been following the blog for long and you are wondering where the post apocalyptic theme intersects with skin boat building, let me explain.  Skin boat building is a technology developed in a pre-industrial environment.  No manufactured goods were available.  All materials had to be scavenged.  In the current state of our society, skin boats can and typically are constructed out of materials that are the output of an industrial manufacturing stream.  But occasionally, I try to build boats that could conceivably be built in an environment where the industrial manufacturing stream has ceased to flow.

I haven't tried the vinyl banners as a boat skin yet, but am currently using one to keep the UV off my skin boats.  I am also thinking of the vinyl as a potential yurt cover.  More on that later.

Iqyax^ (Baidarka) Research

I am currently working on the improved Bay Boat, that is, San Francisco Bay Boat.  The baidarka I had been paddling most frequently is about 20 years old, re-ribbed once and reskinned a number of times and a fairly close replica of an Atka baidarka.  This particular boat just got a paint job.  The old paint job consisted of a varnish base covered some time later by a color coat.  The color coat was peeling badly, probably because I never sanded the base coat before putting on the color coat.  The re-paint is done now.

The baidarka is on the left with its new coat of gray latex house paint.  I store my boats outside so the most critical job of the paint is to keep the UV rays from degrading the nylon skin.  Opaque paint does a good job of that and more cheaply than exterior varnish.  That's my King Islander to the right of the baidarka.
The only drawback of the old baidarka is its narrow width and fairly deep hull which makes it a challenge to keep upright.  It's actually not that bad once you get used to it, but it's not a boat that you can just sit in and relax.  When you're not moving, you need to brace or have the paddle out as an outrigger.  
So, enter a wider version of the Atka iqyax^.  The idea behind this boat is sufficient width to allow lounging without constant bracing but not enough width to make it slow, a boat suited for longer stays on the water, like a bay crossing, about a one hour affair.
Inside view of the hull.  Good width and flat rib profile to make the boat stable. 
And an outside view of the hull with the stringers temporarily taped and lashed in place.  Also note the open jawed bow, a configuration I have been playing with, mostly because this configuration makes it easier to align the keelson with the bow assembly.
Also the upturned nose of the other bow configuration is more prone to breaking because the grain runs across the upturned part instead of in line with it. 

What's Popular?

One of the things that the Google blogger software provides you with is statistics on how many hits the blog gets.  Aside from total page views, there is a ranking of pages in order of hits received.  This particular statistic has always struck me as inexplicable - why do people go to one page more than to another?  But I am starting to form some theories.  First a list of the three all-time highest hit getting postings that I have made. Ready?
 
Number one is The Iqyax^ and the Sea Otter with roughly 7000 hits. 

Number two is The Frilled Lizard Boat with roughly 1500 hits.

And number three is Aleut Bent Wood Hat making with roughly 1000 hits.
How to explain this? 
Here is my theory.
Until I posted about the sea otter, the frilled lizard page was the most popular.  The reason I think is that somewhere in grade school, kids learn about funny looking animals and encounter the frilled lizard.  So then they go on the internet and search for frilled lizard pictures for their school report and voila, they find my page.  Same goes for the sea otter page.  Sea otters are possibly the cutest animals ever and so any page with sea otters will get hits. Bent wood hat making has no cute animals in it, but this may also be a legitimate search topic in Alaska.
So what does this all mean? 
What it means is that cute animals drive up total hits but falsely inflate hit rates and give me a false sense of how much interest there is in skin boats. So if  I  throw in the occasional sea otter or baby goat in a future post, it will be to investigate whether my theory is correct, or maybe I will just be looking for an ego boost.

Alaska Gravy Spill and Sweet Potato that looks like a seal

I know there are blogs out there which handle the resemblance of one thing to another whether it be film stars or funny vegetables or kittens, but just for the sake of convenience, I chose two to display two of these things right here on this blog as a relief from the tyranny of the same thing all the time.
First, a gravy spill that looks like a map of Alaska. Well, sort of, but I think it got pretty close.  See for yourself.


Number two is a sweet potato that looks like a seal.  This one you have to admit is good.

Monday, March 26, 2012

The Education of the Self Taught Designer

A Rube Goldberg design.  The term "Rube Goldberg" has come to mean any overly complicated contraption.  I think Rube was drawing parodies of products produced in the gizmo enamored society that he lived in.
Someone once said that you can't design a thing that you've never built before.  Experience has taught me that this is true.  What that pronouncement means is that to design a thing, you know ahead of time how each design decision will affect the performance of the finished product.  The rub is that until you actually build a thing for the first time there is little chance that it will actually work.
You can of course go to a school where they teach you how to design stuff and you get the benefit of someone else telling you what works and what doesn't so you don't have to figure it out for yourself.
But as I recently observed with the business of designing kayak paddles,  there's nothing like building something that doesn't work to teach you why you should build things that work.  Building things that don't work draw the border on what is possible.  Stray outside that border and you get stuff that doesn't work.  Stay inside the border and you get stuff the works.
So mistakes and bad designs are important because they provide the designer with a better understanding why stuff that works works.  If everything worked then there wouldn't be a need for designers. Designers, good ones at least have a good mental map of the territory of what is possible and what isn't.  The more things the designer has actually built and failed at, the fewer bad designs he / she is likely to pass off on customers.