Unangan (Aleut) Paddle Orientation Revisited

I already have two posts on how Unangan paddlers held their paddles.  To read them, type paddle orientation into the blogger search box on the upper left side of your screen.
Most recently, I have been having conversations with Rob Macks of Laughing Loon Kayaks and he graciously gave me access to some pictures he took of Unangan paddles when he last visited the Smithsonian Institution. Unfortunately I can't post them without the permission of the Smithsonian so I will resort to photos I have posted before.
I haven't seen any Unangan paddles in person, nor handled them.  Rob has. What he pointed out to me is that the Unangan paddles have looms that are roughly triangular with one of the corners of the triangle lining up with the ridge that runs down the center of one side of the paddle.  The looms are also quite deep, commonly about 1-3/4 inches.  The base of the loom's triangle lines up with the flat side of the blades.  What Rob pointed out is that trying to hold the loom with the ridge of the blades facing backwards is uncomfortable because trying to paddle that way has the ridge digging into your palms.
To test the idea of the uncomfortable loom, I carved a loom section out of a piece of two by four with a dimension of 1-3/4 inch deep and 1-1/4 inch wide and roughly triangular with rounded edges so it became more egg-like than triangular in cross section. 
Well, the loom seems a little more comfortable held as shown in the photo below, but not all that uncomfortable the other way around either.  What might be more of an issue, and I have noticed this with one paddle that I made is that a loom with a 1-3/4 inch by 1-1/4 inch cross section is that a loom with these proportions limits how far you can rotate it in your hands to get the right blade angle for efficient paddling.
I will be making a paddle with a loom that is an accurate replica of the Smithsonian type paddles to test this hypothesis.  The idea is that the triangular loom shape will orient the paddle in a favorable way when held flat side back and an unfavorable way when held ridge side back.  

So here is a photo of an Unangan paddler with his paddle.  He looks like a real paddler and so I would expect that when posing for a picture, he would hold the paddle the way he would hold it for paddling, that is, flat side facing backward. Note that the paddler is holding his paddle where the loom transitions into the blade.

This appears to be where you would be holding that paddle while paddling. If you click on the picture above, you will see that that is where the front paddler is holding his paddle.
None of this is conclusive of course, but I suspect that a lot of the dispute about how Unangan paddlers held their paddles has to do with opinions based on Unangan style paddles that aren't very close replicas of the originals.  How you hold a paddle has a lot to do with what is comfortable for you and that has a lot to do with how the paddle was carved and also with how the blades were carved.  Some fairly subtle variations in construction of both loom and blade can easily bias use of the paddle either ridge or flat side towards the back. And as I noticed with my own Unangan style paddles is that I can use them either flat or ridged side back and both ways work although flat side back typically generates more thrust.
Another thing I noticed while looking at Rob Macks' photos of paddles is that on some of them the ridge on the blade was not sharp but rather about a half inch wide and flat.  This type of paddle looked like the basis for the one with the groove down the spine.
One of the paddles in the Smithsonian was also quite long, 8' 6" according to Rob.  It falls into the category of extra long paddles that Jeffrey Dickrell, historian of Unangan kayaks has reported seeing in some historical photos.
So there you have it.  All in all, I suspect that Unangan paddles varied a bit from place to place and from paddler to paddler.  I also suspect that once Russians pressed Unangan paddlers into hunting sea otters for them, paddle and kayak styles became more homogenized than they were before the arrival of the Russians.

Double Ridged Unangan (Aleut) Kayak Paddle

A while back, Suzawa Ikunori of Japan posted some pictures of several Unangan paddles in a Japanese Museum. Unlike most of the Unangan paddles I had seen before which have one face which is more or less flat and one face which has a ridge running down the center,  these paddles had ridges running down both the front and back faces. 

The paddle is quite long assuming the the loom is the usual length of about 22 to 24 inches.

This photo shows three of these double ridged paddles.  The middle one seems to have some damage to the tip.

And this is a drawing of the paddle blade and the relative size of the ridges and the location of the blade edge.
It appears that the layout of the blades is similar to that of the single ridge paddles except that the normally slightly convex side of the blade also has a ridge carved into it.  I have taken one of my single ridged paddles which I found to be too stiff and heavy and have carved away at the flat face of it to create a low ridge on that face.  Testing of this configuration is still pending. 
One thing that double ridged paddles might eliminate is arguments about which is the right way to hold them, ridge forward or ridge backward.  But since the paddle is not symmetrical, there is still room for argument.  I hope to test my own version of the double ridged paddle soon and report on results.

Paddle Design - Stability

In this post I want to focus on ways to design a paddle so it orients itself in the proper direction for paddling without a lot of effort on the part of the paddler. A paddle that requires a tight grip to keep it in control will sap the energy of the paddler and cause fatigue and diminished efficiency.
Not surprisingly, there is more than one way to make paddle orientation easier to control. I will examine three different ways all of which can be used in various combinations. I should also mention that the intended use of the paddle, whether it is meant for racing, cruising, surfing or rolling will have an impact on how it should best be held.
Most traditional paddles have oval or egg shaped looms with the longer dimension of the oval perpendicular to the face of the paddle blade. The oval shape makes it easier to keep the loom from twisting in the hand than a loom with a circular cross section.
A second way to keep the loom from twisting in the hands of the paddler is to hold the paddle at least partly by the root of the blade where it joins the loom. For instance, in a shouldered Greenland paddle, the index finger and the thumb circle the loom while the other fingers and the rest of the palm circle the root of the paddle blade. The flat part of the blade resting against the flat of the palm gives the paddle stability and keeps it from rotating in the hands of the paddler.
I thought at one time that it was only the Greenland paddles that were held this way, but there are some photos of Unangan (Aleut paddlers) that also show them holding their paddles so that at least part of their hand is on the root of the blade and part on the loom.
A third way to stabilize a paddle is to design it so that the paddle blade naturally wants to orient itself in the right direction when the paddler pulls on the loom. This trick only works for paddles that are asymmetrical, that is paddles that have a front face that is different from the back face. When you pull this kind of paddle through the water at some random angle, it will have one face that will naturally orient itself in the direction of travel while the other face orients itself away from the direction of travel. It is like a wind vane which if put sideways into the wind will turn its head into the wind and its tail out of the wind. Examples of this kind of paddle are the Unangan (Aleut) paddle and bent shaft paddles in which the face of the blade slightly trails the loom as the paddle is being pulled through the water.

In these two closeups of Unangan paddlers from the same boat, both paddlers are holding the paddles with the flat face toward the back.  The interesting thing with these paddles is that the weather vane effect would favor holding the paddles flat face toward the front but the shape of the paddle in the areas where paddlers held it also make the opposite orientation stable. The photo was no doubt posed and both paddlers are just holding the boat in position rather than paddling forward.  They may actually be paddling backward. So it is hard to tell whether this is the way they held their paddles when moving along, but regardless of what was happening when the picture was taken, it seems that the shape of the loom allows the paddle to be held in a stable manner regardless of orientation.
This also brings us to the question why so many commercial paddles have looms with round cross sections while traditional paddles almost without exception have looms with oval cross sections.  I suspect the reason is that is simply so much easier and cheaper to manufacture looms with round cross sections.